|
1. Sigma Aldrich
Corp.: Saint Louis, Mo.
Steve Philips Jr. (314) 739-1081
Journeyman Painter:
· Prepared steel structures and duct work by grinding, power washing,
or sanding prior before applying a 3 coat preventive corrosion system.
· Prepared concrete floors by track blasting, grinding, and sanding
prior to applying 3 coats of epoxy and stripping the floors.
2. Callaway Nuclear Plant: Fulton, Missouri
Steve Phillips Jr. (314) 739-1081
Journeyman Painter:
· Attended all morning briefings prior to start of work to discuss
daily goals, previous day’s production, any safety concerns as well as talk
about the previous week’s plant safety audit.
· Monitored all dosimeters while working around all radioactive
material and equipment.
· All concrete floors where wet sanded with floor sanders and palm
sanders prior to applying coatings on the floors.
· Applied 2 coats of epoxy and one coat of clear epoxy clear cealer
and added paint chips with a hand spreader.
· Prepped/Painted/ Stenciled all piping (gas, water, hydrogen, etc.)
3. MidAmerican
Energy: Council Bluffs, IA
Steve Philips Jr. (314) 739-1081
Safety Rep/ Journeyman Painter:
· Assisted in developing daily safe work plans in compliance with FED/
IA OSHA/EPA and other agencies as needed or required.
· Assisted and Participated in the investigation of incidents (near
misses and personal injuries).
· Provided training to new employees on the EHS Policies, both company
and site specific.
· Maintained weekly safety reports
· Journeyman Painter 30% of the time.
4. Holcim
Concrete: St. Genevieve, Mo.
Steve Phillip Jr.: (314) 739-1081
Safety Rep/ Journeyman Painter:
· Assisted in developing daily safe work plans (JSA’S) in compliance
with FED/MO OSHA/EPA and other agencies as required.
· Assisted in all Weekly Site Safety Audits.
· Coordinated daily safety meetings with work personnel.
· Maintained employee’s training/retraining of both Company and Site
specific EHS Polices.
· Journeyman Painter 30% of the time.
5.
Naughton Power Plant: Kemmerer, WY.
Steve Phillips Jr.: (314) 739-1081
Safety Rep/ Journeyman Painter:
· Assisted in developing daily safe work plans (JSA’S) in compliance
with FED/WY OSHA/EPA and other agencies as required.
· Assisted in all Weekly Site Safety Audits.
· Coordinated daily Safety Meeting with work personnel.
· Provided all levels of management updates concerning: environmental,
safety and health regulations and their impact on operations and personnel
within the organization and site contractors.
· Journeyman Painter 30% of the time.
6. Dry Fork
Power Plant: Gillette, WY.
Steve Phillip, Jr.: (314) 739-1081
Safety Rep/ Journeyman Painter:
· Developed and delivered oral and written daily safe work plans in
compliance to the FED/WY OSHA/EPA and other agencies as required.
· AssistedOrganized and Conducted safety audits.
· Recommended HSE goals, objectives, and projects to all Management
levels.
· Managed required programs, such as but not limited to JHA/JSA, Fall
Arrest, PPE, Respiratory, LOTO, Confined Space, Hazard Communications, etc.
· Journeyman Painter 30% of the time.
7. Pueblo Army Chemical Depot: Pueblo, Colorado
Darrick Bullard: (610) 533-0094
· Set up for sand blasting concrete in all secondary containments,
blast tracking all concrete inside of buildings, grinding or chipping areas
that can’t be blast tract. Clean up prior to applying Coro bond ( 1-3 mils
wet ).
· Apply 2 coats of steel seam over the Coro-Bond, sand smooth.
· Apply fiber glass on all cracks and concrete curbs with Cora- Coat,
sand prior to rolling or spraying Phenicon ( 7- 8 mils wet ) two coats
white, then two coats grey ( 4-5 mils wet ).
· Apply Thiokol on all bolts, pipe stands, plates or protrusions
in the concrete floors.
|